The Independent Voice of Southern Methodist University Since 1915

The Daily Campus

The Daily Campus

The Independent Voice of Southern Methodist University Since 1915

The Daily Campus

The Independent Voice of Southern Methodist University Since 1915

The Daily Campus

Symposium attendees smile for the camera.
SMU helps women cast a net into the ocean of (net)working
Evangeline Bulick, contributor • March 27, 2024
The observatory sits behind Dallas Hall on Daniel Street
What is that?
March 25, 2024
Instagram

Bump It! The Complete Boat and Car Stereo Installation Guide

Bump+It%21+The+Complete+Boat+and+Car+Stereo+Installation+Guide

If you’re interested in installing a new stereo in your vehicle, look no further.

Radio installation is one of the most common things that vehicle owners do because they’re looking to upgrade the quality of their sound. Stereos play an important role in sound-quality because they’re what handles all of the data.

While boat and car stereo installation are common tasks, many people aren’t sure how to do it. Installing a stereo isn’t a difficult process, you’ll just need patience.

Read on to learn everything you need to know about how to install a car stereo and boat stereo.

Gather Tools

The first thing you’ll need to do for a stereo installation is to gather the necessary tools. To remove and replace a stereo, you’ll need things like screwdrivers, wrenches, wire strippers, and electrical tape.

You should also get something that will help you remove the panels in your boat or car. Removing panels can be difficult because it’s easy to scratch the surface and break things underneath. Take a look around at your local hardware store for a panel removal tool, it will look something like a miniature pry bar.

Remove the Factory Stereo

After you’ve gathered your tools, you can start removing the stereo that’s currently in your vehicle. You can’t rush through the process because you’ll need to do the process in reverse order to ensure that everything is placed correctly.

Most boats and cars will come with instruction manuals that will tell you how to remove the stereo. In case you don’t have a manual, you can follow these general guidelines. Before starting, make your vehicle is parked, turned off, and the negative cable is removed from the vehicle’s battery.

Car and boat stereos are mounted in several ways:

  • Mounted by spring clips
  • Bolted in place
  • Mounted to a rail system

Removing Spring-clip Mounted Stereo

If your stereo is mounted by spring clips, you’ll need to get a pair of DIN tools. DIN tools can be inserted into the sides of the stereo until you hear a click. The tools will release the spring clips and attach them to the back of the stereo so that you can pull it out.

Removing a Stereo That’s Bolted in Place

Stereos that are bolted in place may require you to pry some of the trim on the panel. When you’ve located the bolts, you can remove them with a wrench and screwdriver. After removing the bolts, you can pull the stereo out.

Removing a Stereo Mounted to a Rail System

Rail systems are common in car stereo systems and can sometimes require more work. There’s a rail that is attached inside the dash of the vehicle that allows the stereo to guide along with it. When a stereo is removed, you’ll often need to remove the rail system so that you can install a new stereo.

Wiring a Stereo

All vehicle stereos come with wiring harnesses that are often unique to the vehicle. These harnesses are typically color-coded, so you’ll need to refer to your stereo’s color diagram to ensure you set everything up correctly. If you were to purchase something like these marine speakers, you’d get a guide that tells you what to do.

If there isn’t a harness in your car or boat, you’ll need to manually identify all of the wires and connect them to the new stereo. When it comes to wiring, you have a few options:

Soldering

Soldering is a common way to connect wires because it involves using metal to bind multiple things together. When you solder the wires, you’ll create a permanent connection that’s secure and allows for maximum current transfer.

Crimping

Crimping is similar to soldering but instead of using metal to form the wires, you essentially change their shapes to hold one another. This method isn’t as effective as soldering, but it’s stable enough for vehicle stereo systems.

Mounting the Stereo

After you’ve connected the wires, the next step is to mount the stereo into your vehicle. This is one of the easier steps in the stereo installation process because you’ve already done the tedious work. The best way to mount a stereo is to get a mounting kit depending on what kind of configuration you have.

When you get a mounting kit, you’ll place that in the dash of your vehicle and then place the stereo in that. However, you can opt for the traditional methods of installation, which include mounting with bolts, using spring clips, and using a rail system.

You’ll want to install the stereo the same way that you removed it but reverse the steps. That’s why it’s important to not rush through the process, so try to keep notes when you’re removing the stereo. Make sure everything is secured after you’ve installed the stereo by tugging at it and going on a test-drive.

Start Your Boat or Car Stereo Installation

Installing a stereo in a vehicle can be an exciting process, so now you know how to do it after reading this article. We encourage anyone interested in doing a boat or car stereo installation to do it because you’ll hear a dramatic difference in sound quality.

When you’ve decided that you’d like to get a new stereo, e sure to browse around for the best deals. You’ll want to remove the stereo in your vehicle before buying a new one so that you know what kind of mount you need. You can go for other mounting methods, but you’ll need to alter the panels.

More to Discover